TPA741DGNRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA741 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.45mA |
| Power Dissipation | 2.14W |
| Quiescent Current | 1.45mA |
| Output Power | 700mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Gain Bandwidth Product | 1.4MHz |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Output Power | 700mW |
| Max Output Power x Channels @ Load | 700mW x 1 @ 8 Ω |
| Harmonic Distortion | 0.5% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA741DGNRG4 Overview
A device has been embedded in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad .Ideally, the chip should be packaged in a Tape & Reel (TR) case.In 8 terminations, the transmission line is terminated with an impedance-matching device.This output is configured with 1-Channel (Mono) .The type of this electrical device is Class AB .The 8 pins are pronged contacts which are part of a signal interface in a computer or other communication device.There is an electronic part mounted in the way of Surface Mount .This electrical device is powered by 2.5V~5.5V volts.Channels 1 are present in the device.When operating, Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.During operation, the temperature should not exceed -40°C~85°C TA .There are 8 pins present on this device.Audio/Video Amplifiers contains it.The TPA741 family includes it.As of this moment, the maximum Output Power of this electronic part is 700mW kWh per hour.For normal operation, the supply voltage (Vsup) should be kept above 2.5V .Amp parts reaches 5.5V when the maximum supply voltage (Vsup) is reached.Amp parts is a Single supply type.Power is supplied by a 3.3/5V volt source.Without external influences, it consumes 1.45mA of quiescent current.
TPA741DGNRG4 Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA741 family
700mW kWh per hour
TPA741DGNRG4 Applications
There are a lot of Texas Instruments TPA741DGNRG4 audio amplifiers applications.
- Automation control systems
- Proportional counter tubes
- Biopotential
- Video conversion and routing
- Weak signal detection
- Communication device
- Fission chambers
- Computer workstations and wireless base stations
- Oscilloscopes
- Inverse/same-phase proportional circuit
