TPIC2603DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 595.510083mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRES 12V BATTERY SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.75W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPIC2603 |
| Pin Count | 24 |
| Max Output Current | 350mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Serial |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Output Current | 350mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Switch Type | General Purpose |
| Output Characteristics | SCHMITT TRIGGER |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Ratio - Input:Output | 1:6 |
| Input Characteristics | STANDARD |
| Voltage - Load | 5.5V~25V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 6 |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 2.25A |
| Rds On (Typ) | 1.7 Ω |
| Turn Off Time | 15 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPIC2603DW Overview
A Tube is used to package it.In the 24-SOIC (0.295, 7.50mm Width) package, it is included.The lighting driver has the mounting type Surface Mount.A General Purpose switch type is owned by it.To ensure reliable operation, set the temperature to -40°C~125°C TA.In order to operate, it requires a voltage supply of 4.5V~5.5V.It comes under the family of TPIC2603.It has a total of 24 terminations.24 pins are used for operation.The LED driving board has a total of 1 functions.The maximum output current drops to 350mA in order to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.It is mounted in the way of Surface Mount.It is equipped with a total of 24 pins.The output current is set to 350mA in this case.It is self-contained in an econtainer with a capacity of Peripheral Drivers.This part is powered by 5V.In order to optimize the efficiency of the supply voltage, it should be set to 5V.This LED driver can also produce ALSO REQUIRES 12V BATTERY SUPPLY.6 drivers are available for the part.
TPIC2603DW Features
Supplied from 5V
Additional features like ALSO REQUIRES 12V BATTERY SUPPLY
TPIC2603DW Applications
There are a lot of Texas Instruments TPIC2603DW Power Switches ICs applications.
- Wearable Devices
- USB3.1 Power Delivery
- PDAs
- HDD, SSD
- Mobile Communication Devices
- USB Ports/Hubs
- Portable GPS Device
- Set-top-box
- Portable/Handheld Devices
- Hot-Swap Systems
