TPIC2603DWG4
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRES 12V BATTERY SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPIC2603 |
| Pin Count | 24 |
| Number of Outputs | 6 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Serial |
| Current - Output (Max) | 350mA |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Rise Time | 50ns |
| Fall Time (Typ) | 50 ns |
| Ratio - Input:Output | 1:6 |
| Input Characteristics | STANDARD |
| Voltage - Load | 5.5V~25V |
| Driver Number of Bits | 6 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 2.25A |
| Rds On (Typ) | 1.7 Ω |
| Turn Off Time | 15 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
TPIC2603DWG4 Overview
Tube is how it's packaged.In the 24-SOIC (0.295, 7.50mm Width) package, it is included.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.The temperature should be set to -40°C~125°C TA to ensure reliable functioning.There is a default setting of 6 for output.It uses a supply voltage of 4.5V~5.5V to operate.The TPIC2603 family contains this object.It consists of 24 terminations in total.The 24 pins are used for the operation of the system.As far as functions are concerned, the lighting driver has 1.This lighting driver is capable of delivering a maximum output of 350mA volts.As long as the supply voltage is 5V, high efficiency can be achieved.Surface Mount is mounted in the way.It is equipped with a total of 24 pins.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage is set to 5.5V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 4.5V.The power supply of the part is 5V.This LED driver can also produce ALSO REQUIRES 12V BATTERY SUPPLY.
TPIC2603DWG4 Features
Supplied from 5V
Additional features like ALSO REQUIRES 12V BATTERY SUPPLY
TPIC2603DWG4 Applications
There are a lot of Texas Instruments TPIC2603DWG4 Power Switches ICs applications.
- Wireless/Networking Cards
- Notebook PC
- Smart Phones, Feature Phones
- Portable Devices
- Various applications equipped with buttons
- Mobile Communication Devices
- Hard Disk Drives
- Wearable Devices
- Hot Swap
- Storage Drives
