TPIC2603DWR
| Parameters | |
|---|---|
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRES 12V BATTERY SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPIC2603 |
| Pin Count | 24 |
| Number of Outputs | 6 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Serial |
| Current - Output (Max) | 350mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Supply Current-Max | 5mA |
| Switch Type | General Purpose |
| Output Characteristics | SCHMITT TRIGGER |
| Ratio - Input:Output | 1:6 |
| Input Characteristics | STANDARD |
| Voltage - Load | 5.5V~25V |
| Driver Number of Bits | 6 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 2.25A |
| Rds On (Typ) | 1.7 Ω |
| Turn Off Time | 15 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SOURCE SINK |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
TPIC2603DWR Overview
It is packaged in the form of a Tape & Reel (TR).The 24-SOIC (0.295, 7.50mm Width) package includes it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~125°C TA for reliable operation.It is possible to use 6 outputs in the lighting driver.Operation is based on a supply voltage of 4.5V~5.5V.The TPIC2603 family consists of this type.A total of 24 terminations can be found in it.It is necessary to use the 24 pins in order to operate the LED driver.There are 1 functions of the LED driver.Its maximum output voltage is 350mAV.The supply voltage of 5V is conducive to high efficiency.It is mounted in the way of Surface Mount.As a result, it has a total of 24 pins.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The Vsup value (maximum supply voltage) is set to 5.5V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 4.5V.The power supply of the part is 5V.ALSO REQUIRES 12V BATTERY SUPPLY can also be produced by using this LED driver.
TPIC2603DWR Features
Supplied from 5V
Additional features like ALSO REQUIRES 12V BATTERY SUPPLY
TPIC2603DWR Applications
There are a lot of Texas Instruments TPIC2603DWR Power Switches ICs applications.
- USB Ports/Hubs
- Portable Devices
- Telecom and Network Systems
- Gaming
- Hard Disk Drives
- HDD, SSD
- HDD and SSD
- Portable Music Players
- Portable GPS Device
- Set-top-box
