TPIC2603DWRG4
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Supply Current-Max | 5mA |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Ratio - Input:Output | 1:6 |
| Input Characteristics | STANDARD |
| Voltage - Load | 5.5V~25V |
| Driver Number of Bits | 6 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 2.25A |
| Rds On (Typ) | 1.7 Ω |
| Turn Off Time | 15 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRES 12V BATTERY SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPIC2603 |
| Pin Count | 24 |
| Number of Outputs | 6 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Serial |
| Current - Output (Max) | 350mA |
| Output Configuration | Low Side |
TPIC2603DWRG4 Overview
The LED driver's packaged as a Tape & Reel (TR).It is included in the package 24-SOIC (0.295, 7.50mm Width).The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~125°C TA.The LED driver has 6 outputs.A supply voltage of 4.5V~5.5V is required for it to operate.There is a TPIC2603 family of things that it belongs to.It has a total of 24 terminations.In order to operate, 24 pins are used.The LED driving board has a total of 1 functions.In terms of output, the lighting driver can provide a maximum of 350mA V.It is possible to achieve a high level of efficiency with a supply voltage of 5V.This lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 24 pins.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.A maximum supply voltage of 5.5V is set in Vsup.Normal operation requires Vsup above 4.5V.In this part, the power supply is set to 5V.ALSO REQUIRES 12V BATTERY SUPPLY can also be produced by using this LED driver.
TPIC2603DWRG4 Features
Supplied from 5V
Additional features like ALSO REQUIRES 12V BATTERY SUPPLY
TPIC2603DWRG4 Applications
There are a lot of Texas Instruments TPIC2603DWRG4 Power Switches ICs applications.
- Storage Drives
- Gaming
- Notebook PC
- Hot Swap
- Portable GPS Device
- Various applications equipped with buttons
- Portable/Handheld Devices
- Portable Video Game Players
- USB3.1 Power Delivery
- HDD and SSD
