TPIC2603NE
| Parameters | |
|---|---|
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Serial |
| Current - Output (Max) | 350mA |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Power Dissipation | 2.5W |
| Output Current | 350mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Turn On Delay Time | 5 μs |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 5 μs |
| Ratio - Input:Output | 1:6 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 5.5V~25V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 6 |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 2.25A |
| Rds On (Typ) | 1.7 Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 5.08mm |
| Length | 23.995mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO REQUIRES 12V BATTERY SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TPIC2603 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
TPIC2603NE Overview
A Tube is used to package it.There is a 20-DIP (0.300, 7.62mm) package that includes it.This lighting drivere has a mounting type of Through Hole.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~125°C TA.Operation is based on a supply voltage of 4.5V~5.5V.The TPIC2603 family contains this object.It has a total of 20 terminations.It is necessary to use the 20 pins in order to operate the LED driver.It consists of 1 functions.This lighting driver is capable of delivering a maximum output of 350mA volts.The supply voltage of 5V is conducive to high efficiency.The LED driving board is mounted in the way of Through Hole.The LED driver has a total of 20 pins.This case results in a 350mA output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.Vsup (maximum supply voltage) is set to 5.5V.For normal operation, the supply voltage (Vsup) should be kept above 4.5V.It has a power supply of 5V.With the help of this lighting driver, ALSO REQUIRES 12V BATTERY SUPPLY can also be produced.The part has 6 drivers.
TPIC2603NE Features
Supplied from 5V
Additional features like ALSO REQUIRES 12V BATTERY SUPPLY
TPIC2603NE Applications
There are a lot of Texas Instruments TPIC2603NE Power Switches ICs applications.
- PDAs
- Set-Top Boxes
- Telecom and Network Systems
- Hot Swap
- Hard Disk Drives
- Hot Swaps
- USB Ports/Hubs
- Mobile Communication Devices
- Wireless Headsets
- Portable Devices
