TPIC2810D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 148.409754mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.087W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPIC2810 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 217mW |
| Output Current | 100mA |
| Max Supply Current | 620μA |
| Voltage - Output | 40V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-DRAIN |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | 13mA |
| Low Level Output Current | 13mA |
| Number of Segments | 8 |
| Switching Frequency | 2MHz |
| Multiplexed Display Capability | NO |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPIC2810D Overview
In order to save board space, the 16-SOIC (0.154, 3.90mm Width) package is used. A LED driver with 8 outputs is designed.As a mounting method, Surface Mount is used.There is no doubt that this is a very efficient and reliable Linear.-40°C~150°C TJ is the operating temperature and it works fine.The operation of this system is supported by 16 terminations.Its configuration is based on 16 pins.The segment count is 8.Surface Mount has been mounted with the device.It is under the base part number TPIC2810 that the LED driver can be found.5.5V is an acceptable maximum value for the supply voltage.In this device, the output voltage is 40V volts.This device contains 16 pins.In addition to Display Drivers, it is also classified by its characteristics.A minimal input voltage of 3V is required for it to operate.As a result, it is designed to operate at a minimal voltage of 3V to ensure the most efficiency possible.It reaches 5.5V when the maximum supply current is allowed.When the maximum supply current is less than 620μA, this device is capable of providing high efficiency.There is no current available to supply to the load.Having the switching frequency at 2MHz enables this electronic component to perform at its best.
TPIC2810D Features
Available in the 16-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~150°C TJ
Supply voltage of 5V
Switching frequency of 2MHz
TPIC2810D Applications
There are a lot of Texas Instruments TPIC2810D LED Driver ICs applications.
- Sports Facility Lighting
- Medical surgery lighting
- LED headlights
- Auxiliary lights for on-vehicle cameras
- Flicker-free LED Lighting using R1580N
- LED Lighting PFCs, Linear Dimmable
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- A- lamps
- Linear fluorescent
- General lighting
