TPIC2810DG4
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.087W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPIC2810 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 1.087W |
| Output Current | 210mA |
| Max Supply Current | 1mA |
| Voltage - Output | 40V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-DRAIN |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 100mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 13mA |
| Low Level Output Current | 13mA |
| Number of Segments | 8 |
| Switching Frequency | 2MHz |
| Multiplexed Display Capability | NO |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
TPIC2810DG4 Overview
Using its 16-SOIC (0.154, 3.90mm Width) package, it is possible to save board space. LED drivers design with 8 outputs.To mount, use Surface Mount.There is no doubt that this is a very efficient and reliable Linear.When the temperature is -40°C~150°C TJ, it can work normally.The operation of this system is supported by 16 terminations.In this LED driver, the base is configured as 16.There are 8 segments in it.Surface Mount is mounted on it.The LED driver is available under the part number TPIC2810.The supply voltage of 5.5V is an acceptable maximum value.There is 40V voltage output from the device.A device with 16 pins is available.In addition, a Display Drivers is assigned based on the characteristics of the object.This device requires a minimum voltage of 3V volts.It achieves maximum efficiency with a minimal voltage supply of 3V.In the event that the maximum supply current is allowed, it reaches 5.5V.When the maximum supply current is less than 1mA, this device is capable of providing high efficiency.210mA is the maximum amount of current that can be supplied to the load.It is capable of fulfilling its full functionality when the switching frequency remains at 2MHz.
TPIC2810DG4 Features
Available in the 16-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~150°C TJ
Supply voltage of 5V
Switching frequency of 2MHz
TPIC2810DG4 Applications
There are a lot of Texas Instruments TPIC2810DG4 LED Driver ICs applications.
- Constant Voltage Power Source for portable equipment
- Linear fluorescent
- Dimmable LED for vehicle interiors
- Street lighting
- Sports Facility Lighting
- LED Lightings for Inspection Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Replacement lamps
- Stage Lighting and Signage
- A- lamps
