TPIC2810DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 148.409754mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.087W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 2MHz |
| Base Part Number | TPIC2810 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 1.087W |
| Output Current | 100mA |
| Max Supply Current | 620μA |
| Voltage - Output | 40V |
| Topology | Shift Register |
| Output Characteristics | OPEN-DRAIN |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | 13mA |
| Low Level Output Current | 13mA |
| fmax-Min | 2 MHz |
| Number of Segments | 8 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPIC2810DR Overview
The board's 16-SOIC (0.154, 3.90mm Width) package saves space. Using this LED driver, there are 8 outputs.It adopts the way of Surface Mount for mounting.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.When the temperature is -40°C~150°C TJ, it can work normally.It operates at 2MHz frequency.In order for it to operate, it has 16 terminations.The LED light driver has a base configuration of 16 pins.If the voltage supply is lower than 3V, undetermined failures may occur.It is estimated that there are 8 segments.The mount is in the direction of Surface Mount.This LED driver has the part number TPIC2810.It is acceptable to supply voltages of 5.5V volts.There is 40V voltage output from this device.On this device, there are 16 pins.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.It achieves maximum efficiency with a minimal voltage supply of 3V.A minimal supply current is required in order for this device to provide high efficiency.The load is capable of receiving 100mA current.
TPIC2810DR Features
Available in the 16-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~150°C TJ
Frequency of 2MHz
Supply voltage of 5V
TPIC2810DR Applications
There are a lot of Texas Instruments TPIC2810DR LED Driver ICs applications.
- Amusement Machines
- Refrigeration lighting
- Industrial LED Lighting: Image Recognition Devices
- LED Lightings for Inspection Devices
- Sports Facility Lighting
- Down lighting
- LED Lightings for Industrial Equipment
- Auxiliary lights for on-vehicle cameras
- Dimmable LED for vehicle interiors
- Museum lighting
