TPIC2810DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.087W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 2MHz |
| Base Part Number | TPIC2810 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Number of Elements | 1 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 1.087W |
| Output Current | 100mA |
| Max Supply Current | 620μA |
| Voltage - Output | 40V |
| Topology | Shift Register |
| Logic Function | Shift Register |
| Output Characteristics | OPEN-DRAIN |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | 13mA |
| Low Level Output Current | 13mA |
| fmax-Min | 2 MHz |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPIC2810DRG4 Overview
There is also a 16-SOIC (0.154, 3.90mm Width) package that is used to save space on the board. In this LED driver, there are 8 outputs.As far as mounting is concerned, Surface Mount is adopted.In this case, it emerges as a Linear with a high efficiency.When the temperature is -40°C~150°C TJ, it can work normally.The system operates at a frequency of 2MHz.In this case, there are 16 terminations.The base of this board is configured as 16 pins.It is likely that undetermined failures will occur if the voltage supply is less than 3V.The device has been mounted on the Surface Mount.TPIC2810 is the base part number for this LED driver.Ideally, the supply voltage should be 5.5V.The device has a voltage output of 40V volts.16 pins are available on the device.Moreover, it can be classified as Display Drivers due to its characteristics.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.When the maximum supply current is less than 620μA, this device is capable of providing high efficiency.100mA is the maximum current the load can handle.
TPIC2810DRG4 Features
Available in the 16-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~150°C TJ
Frequency of 2MHz
Supply voltage of 5V
TPIC2810DRG4 Applications
There are a lot of Texas Instruments TPIC2810DRG4 LED Driver ICs applications.
- Constant Voltage Power Source for portable equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Refrigeration lighting
- Medical surgery lighting
- Other Electronic Devices
- Auxiliary lights for on-vehicle cameras
- LED Lightings for Inspection Devices
- Down lights
- Sports Facility Lighting
- LED backlight driver for LCD displays for portable equipment
