TPIC44L02DB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPIC44L02 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Nominal Supply Current | 2.6mA |
| Output Current | 1.2mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 μs |
| Rise Time | 3.5μs |
| Fall Time (Typ) | 3 μs |
| Turn-Off Delay Time | 3.5 μs |
| Rise / Fall Time (Typ) | 3.5μs 3μs |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 0.0012A |
| Supply Voltage1-Nom | 12V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2mA 1.2mA |
| High Side Driver | NO |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPIC44L02DB Overview
Its 24-SSOP (0.209, 5.30mm Width) package is adopted for higher flexibility.Tube represents the package.Surface Mount is the way in which it is mounted.When the supply voltage is set to 4.5V~5.5V, it can demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET has been used in its design.For this device, the temperature range is -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Mosfet driver is based on 24 terminations.The base part number TPIC44L02 refers to a number of related parts.Mosfet driver is mounted using Surface Mount.Mosfet driver is configured wMosfet driverh 24 pins when designing.In order to operate, a voltage of 5V has to be applied.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.On the board, there are 24 component pins.For its basis, there are 4 outputs integrated.1.2mA is the maximum output current supported by the device.Due to its power supply of 5V, it provides an effective solution to power supply problems for a wide range of applications.
TPIC44L02DB Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
24 pins
TPIC44L02DB Applications
There are a lot of Texas Instruments TPIC44L02DB gate drivers applications.
- High power buffers
- Multicolor LED/laser displays
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Dual-Battery Systems
- Automotive Applications
- Portable computers
- Telecom switch mode power supplies
- Video amplifiers
- UPS systems
