TPIC46L01DBR
| Parameters | |
|---|---|
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 208.397344mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPIC46L01 |
| Pin Count | 28 |
| Power Supplies | 5V |
| Supply Current-Max | 4.2mA |
| Input Type | Non-Inverting |
| Output Current-Max | 0.0012A |
| Rise / Fall Time (Typ) | 3.5μs 3μs |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 6 |
| Output Peak Current Limit-Nom | 0.0012A |
| Supply Voltage1-Nom | 12V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2mA 1.2mA |
| High Side Driver | NO |
| Height | 2mm |
TPIC46L01DBR Overview
In order to increase flexibility, the package 28-SSOP (0.209, 5.30mm Width) is used.Gate drivers is package in Tape & Reel (TR) case.Gate drivers is configured wGate driversh 6 drivers.Surface Mount is mounted in the way.When the supply voltage is 4.5V~5.5V it is able to demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.This device can operate at temperatures up to -40°C~150°C TJ.Non-Inverting is used as the input type in this program.There are 28 terminations to form the base of its configuration.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TPIC46L01.Mounting the device requires Surface Mount.During design, it is configured with 28 pins.A supply voltage of 5V is required for operation.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.On the board, there are 28 component pins.Due to its power supply of 5V, it provides an effective solution to power supply problems for a wide range of applications.Mosfet driver ic is not possible to exceed 4.2mA when the supply current is being supplied.
TPIC46L01DBR Features
Embedded in the Tape & Reel (TR) package
6 drivers
Employing a gate type of N-Channel MOSFET
28 pins
TPIC46L01DBR Applications
There are a lot of Texas Instruments TPIC46L01DBR gate drivers applications.
- Motor Control
- High-speed communications
- General Purpose 3-Phase Inverter
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Industrial Motor Inverter - Power Tools, Robotics
- Industrial Power Supplies
- High power buffers
- Power factor correction (PFC) circuits
- Solar power supplies
- High current laser/LED systems
