TPIC46L01DBRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 208.397344mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPIC46L01 |
| Pin Count | 28 |
| Power Supplies | 5V |
| Supply Current-Max | 4.2mA |
| Input Type | Non-Inverting |
| Output Current-Max | 0.0012A |
| Rise / Fall Time (Typ) | 3.5μs 3μs |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 6 |
| Output Peak Current Limit-Nom | 0.0012A |
| Supply Voltage1-Nom | 12V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2mA 1.2mA |
| High Side Driver | NO |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPIC46L01DBRG4 Overview
In order to increase flexibility, the package 28-SSOP (0.209, 5.30mm Width) is used.Tape & Reel (TR) is the packaging method.Configuration is supported by 6 drivers.Surface Mount is the way in which it is mounted.A supply voltage of 4.5V~5.5V demonstrates its superiority.Gate type N-Channel MOSFET has been used in its design.Temperature range -40°C~150°C TJ is allowed for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Mosfet driver consists of 28 terminations as Mosfet drivers foundation.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TPIC46L01.In this case, Surface Mount indicates how the device is mounted.A total of 28 pins are available on the device.Mosfet driver is designed specifically to run on 5V volts of power.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.There are several useful electronic components within its subcategory MOSFET Drivers.A board with 28 component pins is available.Due to its power supply of 5V, it provides an effective solution to power supply problems for a wide range of applications.When operating, the supply current cannot exceed 4.2mA.
TPIC46L01DBRG4 Features
Embedded in the Tape & Reel (TR) package
6 drivers
Employing a gate type of N-Channel MOSFET
28 pins
TPIC46L01DBRG4 Applications
There are a lot of Texas Instruments TPIC46L01DBRG4 gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- Industrial Power Supplies
- Isolated Gate Driver Supplies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Industrial motor drives - compact, standard, premium, servo drives
- Motor Drives
- Isolated Supplies for Motor Control
- Motor controllers
- Dual-Battery Systems
- Welding
