TPIC6B273DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 513.211417mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | TPIC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latch |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPIC6B273 |
| Pin Count | 20 |
| Output Voltage | 50V |
| Output Type | Standard |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 30pF |
| Output Current | 150mA |
| Number of Bits | 8 |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 150 ns |
| Family | 6B |
| Logic Function | D-Type, Latch |
| Output Characteristics | OPEN-DRAIN |
| Logic Type | D-Type Latch |
| Power Supply Current-Max (ICC) | 0.3mA |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
TPIC6B273DW Overview
Package 20-SOIC (0.295, 7.50mm Width) includes it. Tube is the way in which it is packaged. It uses Standard as the output. There is a logic type of D-Type Latch for this electrical device. According to Surface Mount, this electronic part is mounted. With a supply voltage of 4.5V~5.5V, it operates. During operation, the temperature is set at -40°C~125°C. An FPGA of this type belongs to the TPIC series. Electronic parts with 8 bits are designed for this application. This device is designed with 20 terminations. The family it belongs to is TPIC6B273. The device works with a voltage of 5V for its supply voltage. 20 pins are included. It is part of the family of electronic devices called 6B. 20 pins are used in its design. A Surface Mount mounting method has been used for this electronic part. The part belongs to the FF/Latch subcategory. A total of 5V power supplies are required for it to operate. The output current of 150mA makes it feature maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. A total of 1 elements make up this object. When the maximum power current (ICC) is supplied for its operation, it reaches 0.3mA.
TPIC6B273DW Features
20-SOIC (0.295, 7.50mm Width) package
TPIC series
8 Bits
TPIC6B273 family
20 pin count
20 pins
5V power supplies
1 elements
TPIC6B273DW Applications
There are a lot of Texas Instruments TPIC6B273DW Latches applications.
- Relay
- Hammer Device Information
- Automotive Cluster
- Counter
- Bus system register with enable parallel lines at bus side
- Parallel data storage
- Watches
- Address register
- Shift register
- Lamp and Display (LED)
