TPIC6B273DWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 19 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 537.308512mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | TPIC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPIC6B273 |
| Pin Count | 20 |
| Output Type | Standard |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 30pF |
| Output Current | 500mA |
| Number of Bits | 8 |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 150 ns |
| Family | 6B |
| Logic Function | D-Type, Latch |
| Output Characteristics | OPEN-DRAIN |
| Logic Type | D-Type Latch |
| Power Supply Current-Max (ICC) | 0.3mA |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPIC6B273DWG4 Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. Packaged in the way of Tube. It is configured with an output of Standard. There is a logic type of D-Type Latch for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. There is a temperature of -40°C~125°C at which the system operates. TPIC is the series number of this FPGA. This electronic part is designed with 8 Bits. In this device, there are 20 terminations that have been designed. As a member of the TPIC6B273 family, it falls under that category. The device is operated when the supply voltage is set to 5V. 20 pins are provided. In terms of electronic devices, this one is in the 6B family. 20 pins are used in its design. A Surface Mount mounting method has been used for this electronic part. It belongs to the subcategory of FF/Latches. There are 5V power supplies required for this machine to operate. Its output current of 500mA ensures maximum design flexibility. High efficiency requires a supply voltage of 5V. 8 output lines generate the binary equivalent of the input lines. It consists of 1 elements. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.3mA.
TPIC6B273DWG4 Features
20-SOIC (0.295, 7.50mm Width) package
TPIC series
8 Bits
TPIC6B273 family
20 pin count
20 pins
5V power supplies
1 elements
TPIC6B273DWG4 Applications
There are a lot of Texas Instruments TPIC6B273DWG4 Latches applications.
- Display driver
- Buffer Storage
- Counter
- Buffer register
- Stacked or Push-Down Registers
- Multistage ripple counting
- Frequency dividing
- Automatic test equipment
- Parallel data synchronization
- Accumulator Registers
