banner_page

TPIC6B273DWR

D-Type, Latch 4.5V~5.5V 8 Bits Standard Latches TPIC Series TPIC6B273 20 Pins DUAL 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPIC6B273DWR
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 455
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Standard Latches TPIC Series TPIC6B273 20 Pins DUAL 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 510.007921mg
Operating Temperature -40°C~125°C
Packaging Cut Tape (CT)
Series TPIC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Subcategory FF/Latches
Packing Method TR
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number TPIC6B273
Pin Count 20
Output Voltage 50V
Output Type Standard
Operating Supply Voltage 5V
Number of Elements 1
Circuit 8:8
Polarity Inverting
Power Supplies 5V
Load Capacitance 30pF
Output Current 150mA
Number of Bits 8
Propagation Delay 150 ns
Turn On Delay Time 150 ns
Family 6B
Logic Function D-Type, Latch
Output Characteristics OPEN-DRAIN
Logic Type D-Type Latch
Power Supply Current-Max (ICC) 0.3mA
Number of Output Lines 8
Clock Edge Trigger Type Positive Edge
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPIC6B273DWR Overview


There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). The package is in the form of Cut Tape (CT). In this configuration, the output is set to Standard. In this electrical device, the logic type is D-Type Latch. Mounting this electronic component follows the Surface Mount method. With a supply voltage of 4.5V~5.5V, it operates. There is -40°C~125°C operating temperature. TPIC is the series number of this FPGA. This electronic part is designed with 8 Bits. This device has 20 terminations. This type belongs to the TPIC6B273 family. In order to function, the supply voltage should be set to 5V. There are 20 pins attached to it. In the world of electronics, this electronic device belongs to the family of 6B. It is designed with 20 pins. A Surface Mount mounting method has been used for this electronic part. This part can be found within the FF/Latches subcategory. There are 5V power supplies attached to it. This device is well suited for TR based on its reliable performance. The output current of 150mA makes it feature maximum design flexibility. In order to achieve high efficiency, the supply voltage should be kept at 5V. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. A total of 1 elements make up this object. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.3mA.

TPIC6B273DWR Features


20-SOIC (0.295, 7.50mm Width) package
TPIC series
8 Bits
TPIC6B273 family
20 pin count
20 pins
5V power supplies
1 elements

TPIC6B273DWR Applications


There are a lot of Texas Instruments TPIC6B273DWR Latches applications.

  • Automotive HEV/EV Powertrain
  • Counters
  • Avionics
  • Clocks
  • Buffer Storage
  • Synchronous frequency dividers
  • Display
  • Double bus register system
  • Bus system register with enable parallel lines at bus side
  • Up/down difference counting

Write a review

Note: HTML is not translated!
    Bad           Good