TPIC6B273DWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | TPIC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPIC6B273 |
| Pin Count | 20 |
| Output Type | Standard |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 30pF |
| Output Current | 500mA |
| Number of Bits | 8 |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 150 ns |
| Family | 6B |
| Logic Function | D-Type, Latch |
| Output Characteristics | OPEN-DRAIN |
| Logic Type | D-Type Latch |
| Power Supply Current-Max (ICC) | 0.3mA |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPIC6B273DWRG4 Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. A package of Tape & Reel (TR) has been used. Standard is the output configured for it. There is a logic type of D-Type Latch for this electrical device. Mounting this electronic component follows the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. It is -40°C~125°C at the operating temperature. An FPGA in this series belongs to the TPIC family. It is designed with 8 bits. This device has been designed with 20 terminations available. It belongs to TPIC6B273 family. The device works with a voltage of 5V for its supply voltage. 20 pins are provided. In the world of electronics, this electronic device belongs to the family of 6B. The 20 pins are designed into it. The electronic part is mounted using the Surface Mount method. The part belongs to the FF/Latches subcategory. The system is powered by 5V sources. The device's reliable performance makes it a good choice for TR. It features maximum flexibility in design due to 500mA output current. The supply voltage should be maintained at 5V for high efficiency. The binary equivalent of the input line is generated by 8 output lines. It consists of 1 elements. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.3mA is needed for operation.
TPIC6B273DWRG4 Features
20-SOIC (0.295, 7.50mm Width) package
TPIC series
8 Bits
TPIC6B273 family
20 pin count
20 pins
5V power supplies
1 elements
TPIC6B273DWRG4 Applications
There are a lot of Texas Instruments TPIC6B273DWRG4 Latches applications.
- Parallel-to-Serial Data Conversion
- Pattern Generators
- Parallel data storage
- Shift register
- Control circuits
- Buffer register
- Communication systems
- Pseudo-random code generators
- Shift Registers
- Accumulator Registers
