TPIC9201N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.812W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TPIC9201 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Voltage | 16.5V |
| Output Type | N-Channel |
| Max Output Current | 350mA |
| Supply Voltage-Min (Vsup) | 7V |
| Number of Channels | 1 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 150mA |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Power Dissipation | 1.812W |
| Output Current | 28μA |
| Voltage - Supply (Vcc/Vdd) | 0V~5.25V |
| Max Supply Current | 5mA |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Max Input Voltage | 18V |
| Output Current per Channel | 200mA |
| Rise Time | 10μs |
| Fall Time (Typ) | 10 μs |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 7V~18V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Length | 25.4mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPIC9201N Overview
A Tube is used to package it.This file is included in package 20-DIP (0.300, 7.62mm).Mounting type Through Hole is selected for the LED driving board.A General Purpose switch type is owned by it.It is best to set the temperature to -40°C~125°C TA to ensure reliable operation.There are 8 outputs available on this lighting driver.To operate, it needs a supply voltage of 0V~5.25V.The maximum output voltage of this LED driver is N-Channel volts.It is a member of the TPIC9201 family.A total of 20 terminations have been recorded.The 20 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.Its maximum output voltage is 150mAV.The maximum output current must drop to 350mA to meet the operation criteria.The lighting driver is mounted in the way of Through Hole.A total of 20 pins are present on it.When this is the case, the output current is set to 28μA.Self-contained LED driver with Power Management Circuits capacity in an econtainer.For normal operation, the supply voltage (Vsup) must be kept above 7V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.Its maximum input voltage is 18V volts.It requires a maximum current requirement of 5mA.
TPIC9201N Features
1 channels
TPIC9201N Applications
There are a lot of Texas Instruments TPIC9201N Power Switches ICs applications.
- Notebook and Tablet Computers
- Notebook PC
- Wireless Headsets
- Low Voltage I/O System Power
- Solid-State Drives
- Wireless/Networking Cards
- PDAs
- Portable Music Players
- USB Protection
- USB Ports/Hubs
