banner_page

TPIC9201PWP

N-Channel 0.65mm PMIC TPIC9201 20 Pin 20-PowerTSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPIC9201PWP
  • Package: 20-PowerTSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 709
  • Description: N-Channel 0.65mm PMIC TPIC9201 20 Pin 20-PowerTSSOP (0.173, 4.40mm Width) (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-PowerTSSOP (0.173, 4.40mm Width)
Number of Pins 20
Weight 81.788374mg
Operating Temperature -40°C~125°C TA
Packaging Tube
JESD-609 Code e4
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Power Management Circuits
Max Power Dissipation 3.787W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.65mm
Base Part Number TPIC9201
Pin Count 20
Number of Outputs 8
Output Type N-Channel
Max Output Current 350mA
Operating Supply Voltage 18V
Supply Voltage-Min (Vsup) 7V
Number of Channels 1
Interface Serial
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Current - Output (Max) 150mA
Output Configuration Low Side
Voltage - Supply (Vcc/Vdd) 0V~5.25V
Max Supply Current 5mA
Adjustable Threshold NO
Input Type Non-Inverting
Switch Type General Purpose
Max Input Voltage 18V
Output Current per Channel 200mA
Ratio - Input:Output 1:8
Voltage - Load 7V~18V
Fault Protection Current Limiting (Fixed), Over Temperature
Height Seated (Max) 1.2mm
Length 6.5mm
Width 4.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPIC9201PWP Overview


It is packaged in the manner of a Tube.It is included with the 20-PowerTSSOP (0.173, 4.40mm Width) package as well.A Surface Mount mounting is used for the LED driving board.There is a General Purpose switch type associated with it.It is recommended to set the temperature to -40°C~125°C TA in order to ensure reliable operation.It is possible to use 8 outputs in the lighting driver.The LED driving board operates with a supply voltage of 0V~5.25V.A maximum voltage of N-Channel volts is available from the output of this LED driver.I believe it belongs to the TPIC9201 family.The termination count is 20.The 20 pins are used to operate the LED driver.The LED driver has 1 functions.This lighting driver is capable of delivering a maximum output of 150mA volts.This results in the maximum output current dropping to 350mA to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.In total, it has 20 pins.A self-contained LED driver with a capacity of Power Management Circuits is contained in an econtainer.For normal operation, the supply voltage (Vsup) should be kept above 7V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 available channels.In order to optimize the efficiency of the supply voltage, it should be set to 18V.The maximum input voltage is 18V volts.For its operation, a maximum current requirement of 5mA is required.

TPIC9201PWP Features


1 channels

TPIC9201PWP Applications


There are a lot of Texas Instruments TPIC9201PWP Power Switches ICs applications.

  • Handheld Devices
  • Smartphone and PDA
  • Hot Swap
  • USB Ports/Hubs
  • Hard Disk Drives
  • Notebook and Tablet Computers
  • PDAs
  • Smart Phones, Feature Phones
  • Portable Devices
  • Solid State Drivers

Write a review

Note: HTML is not translated!
    Bad           Good