TPL9201N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.8W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TPL9201 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Voltage | 5V |
| Output Type | N-Channel |
| Max Output Current | 350mA |
| Supply Voltage-Min (Vsup) | 7V |
| Interface | Serial |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Output Current | 150mA |
| Voltage - Supply (Vcc/Vdd) | 0V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 200mA |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 7V~18V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Length | 25.4mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPL9201N Overview
It's?packaged?in?the way?of?a?Tube.The 20-DIP (0.300, 7.62mm) package contains it.This lighting drivere has a mounting type of Through Hole.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~125°C TA for reliable operation.As a default, the output is set to 8.A voltage of 0V~5.25V is used to power it.It produces a maximum output voltage of N-Channel volts at its maximum output.It is a member of the TPL9201 family.It contains 20 terminations.During operation, the 20 pins are used.There are 1 functions of the LED driver.Maximum output current falls to 350mA when operation criteria are met.It is mounted in the way of Through Hole.20 pins are equipped with it.The output current is set to 150mA in this case.A container with a capacity of Power Management Circuits contains this self-contained lighting driver.The supply voltage (Vsup) should be kept above 7V for normal operation.In this LED driving board, the analog IC ANALOG CIRCUIT is employed.
TPL9201N Features
TPL9201N Applications
There are a lot of Texas Instruments TPL9201N Power Switches ICs applications.
- Hot Swap
- Handheld Devices
- Storage Drives
- Mobile Communication Devices
- Portable Video Game Players
- Various applications equipped with buttons
- PDAs
- Wireless Modem Data Cards
- USB Protection
- Solid State Drivers
