TPL9201PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 3.7W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPL9201 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Voltage | 5V |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Supply Voltage-Min (Vsup) | 7V |
| Number of Channels | 8 |
| Interface | Serial |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Output Current | 150mA |
| Voltage - Supply (Vcc/Vdd) | 0V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 7V~18V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPL9201PWP Overview
It is packaged in the manner of a Tube.There is a 20-PowerTSSOP (0.173, 4.40mm Width) package that includes it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type that it owns.Ensure reliable operation by setting the temperature to -40°C~125°C TA.There is a default setting of 8 for output.To operate, it needs a supply voltage of 0V~5.25V.There is a maximum output voltage of N-Channel volts on this LED driver.As you can see, it comes from the TPL9201 family.It contains 20 terminations.The 20 pins are used for the operation of the system.Currently, there are 1 functions associated with the lighting driver.Maximum output current falls to 150mA when operation criteria are met.As a result, it has a total of 20 pins.This case results in a 150mA output current.Self-contained LED driver with Power Management Circuits capacity in an econtainer.Normal operation requires a voltage above 7V for the supply voltage.In this lighting driver, ANALOG CIRCUIT is the analog IC.There are a total of 8 available channels.
TPL9201PWP Features
8 channels
TPL9201PWP Applications
There are a lot of Texas Instruments TPL9201PWP Power Switches ICs applications.
- PC Cards
- Mobile Communication Devices
- PC Card Hot Swap
- PDAs
- Solid State Drivers
- Wireless Headsets
- USB Ports/Hubs
- Hot-Swap Systems
- USB Power Distribution
- Various applications equipped with buttons
