TPL9201PWPR
| Parameters | |
|---|---|
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Voltage | 5V |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Supply Voltage-Min (Vsup) | 7V |
| Number of Channels | 8 |
| Interface | Serial |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Output Current | 150mA |
| Voltage - Supply (Vcc/Vdd) | 0V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 7V~18V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 3.7W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPL9201 |
TPL9201PWPR Overview
Tape & Reel (TR) is the way it's packaged.It is included with the 20-PowerTSSOP (0.173, 4.40mm Width) package as well.It has been mounted as Surface Mount on the LED driver.It owns General Purpose switch type.It is best to set the temperature to -40°C~125°C TA to ensure reliable operation.The LED driver has a total of 8 outputs.A voltage of 0V~5.25V is used to power it.A maximum voltage of N-Channel volts is available from the output of this LED driver.It comes under the family of TPL9201.There are 20 terminations in it.The operation is performed through the 20 pins.As far as the lighting driver is concerned, there are 1 functions.The maximum output current is reduced to 150mA to meet the operation criteria.The LED driving board is equipped with a total of 20 pins.The output current is set to 150mA in this case.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.For normal operation, the supply voltage (Vsup) should be kept above 7V.It uses an analog IC, which is ANALOG CIRCUIT.In total, 8 channels are available.
TPL9201PWPR Features
8 channels
TPL9201PWPR Applications
There are a lot of Texas Instruments TPL9201PWPR Power Switches ICs applications.
- Portable Devices
- Solid State Drivers
- USB Ports/Hubs
- Wireless Headsets
- USB Power Distribution
- Storage Drives
- Hot Swaps
- HDD and SSD
- Handheld Devices
- Various applications equipped with buttons
