TPL9201PWPRG4
| Parameters | |
|---|---|
| Package / Case | HTSSOP EP |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Max Output Current | 150mA |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 8 |
| Interface | Serial |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 7V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Power Dissipation-Max | 3.787W |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Max Supply Current | 5mA |
| Current - Output | 150mA |
| Voltage - Output | 16.5V |
| Max Input Voltage | 18V |
| Fault Protection | Over Temperature |
| Number of Drivers | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPL9201PWPRG4 Overview
This is included in the HTSSOP EP package.Hot-swappable device is currently possible to access 8 channels.A Tape & Reel (TR)-shaped package holds it.The terminations total 20.The terminal position of the device is DUAL.20 pins make up its total.20 pins are used to operate the system.This gadget is self-contained in?Power Management Circuits.For stable operation, 125°C°C is the maximum operating temperature.Hot-swappable device works at a minimum temperature of -40°C degrees Celsius to maintain reliabilHot-swappable devicey.As for the IC, this gadget uses ANALOG CIRCUIT.Maximum supply voltage is 18VV.Low supply voltages, such as 7VV, are possible.This results in a maximum output current of 150mA, which meets the operation criteria.Hot Swap operates at a maximum current of 5mA.
TPL9201PWPRG4 Features
The terminal position of 20
TPL9201PWPRG4 Applications
There are a lot of Texas Instruments TPL9201PWPRG4 hot swap controllers applications.
- Industrial application
- Hard drive
- Firewire
- Electric vehicle
- Power supply hotswap & inrush control
- Industrial high-side switches
- Backplane
- Servers
- Network router
- Inrush current control
