TPPM0115DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPPM0115 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 2.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 12.6V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 2mA |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 11.4V~12.6V |
| Control Features | Phase Control, Power Good |
| Max Output Voltage | 2.5V |
| Topology | Buck |
| Min Input Voltage | 11.4V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 12.6V |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1V |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 200kHz |
| Clock Sync | No |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPPM0115DG4 Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. For outputs of 2, this dc motor controller is suitable. There is a Tube solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 11.4V~12.6V. Suitable for work in a 0°C~70°C TA dc switcher. It is suitable for general dc dc regulator when it is set to Surface Mount. To provide efficient switching control, Phase Control, Power Good is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. The 8 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt a variety of control techniques, including HYSTERETIC CURRENT MODE. There is a DC switcher's nominal voltage of 12V. Search for "TPPM0115" to find other relevant dc to dc converter ics. Switching converter has a total of 8 pins. The test statistics indicate that DC regulator outputs a voltage of 2.5V. If you start a project, note down the dc dc regulator's usual output current of 500mA. DC switcher's Surface Mount qualifies it for most applications and prototypes. DC regulators have a maximum frequency of 200kHz. To run the voltage regulator dc to dc safely and reliably, users should apply 12.6V to the voltage regulator dc to dc. The dc switcher's maximum input voltage is 12.6V; users must limit it accordingly. Switching controller is necessary to have a supply voltage of 11.4V. Datasheets indicate that the switching converter can output 2.5V volts at its maximum. At its lowest voltage, the voltage controller does not produce less than 1V. The nominal current supply of this the controllers dc is 2mA.
TPPM0115DG4 Features
Transistor Driver Outputs
Phase Control, Power Good
HYSTERETIC CURRENT MODE
TPPM0115DG4 Applications
There are a lot of Texas Instruments TPPM0115DG4 DC to DC converter applications.
- Plate bending machines
- Production lines
- Television equipment
- Shearing machines
- Drilling machines
- PSRR circuits
- Electric heating, lighting
- Elevator lighting
- Textile machinery
- Machining centers
