TPPM0115DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPPM0115 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 2.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 12.6V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 11.4V~12.6V |
| Output Power | 400mW |
| Control Features | Phase Control, Power Good |
| Input Voltage (Min) | 11.4V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 200kHz |
| Clock Sync | No |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPPM0115DR Overview
As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. It is sufficient to generate 2 outputs with this dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's11.4V~12.6V is the operating voltage and supply voltage of the dc control. A 0°C~70°C TA dc switcher is not a problem. The Surface Mount value makes it suitable for general dc dc regulator. The dcdc regulator features Phase Control, Power Good for efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Switching converters are designed with the terminal (s) at position DUAL . A variety of 8 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including HYSTERETIC CURRENT MODE. It is inputted with a DC switcher's voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "TPPM0115". In total, switching converter has 8 pins. An input voltage of 11.4V is the minimum required for the dc dc voltage regulator. Statistically, DC regulator outputs 2.5V volts. If you are starting a new project, you should note the dc dc regulator's typical output current is 500mA. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is a maximum frequency of 200kHz on this dc regulators. To run the voltage regulator dc to dc safely and reliably, users should apply 12.6V to the voltage regulator dc to dc.
TPPM0115DR Features
Transistor Driver Outputs
Phase Control, Power Good
HYSTERETIC CURRENT MODE
TPPM0115DR Applications
There are a lot of Texas Instruments TPPM0115DR DC to DC converter applications.
- Drilling machines
- CMM
- Automation technology
- Emergency lighting monitoring equipment
- Smoke prevention equipment
- Flaw detection equipment
- Product testing
- Scientific research
- PSRR circuits
- SMT equipment
