Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
16-PowerTSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Feature |
Slew Rate Controlled |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
13.5V |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS1HA08 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Supply Voltage-Min (Vsup) |
8V |
Interface |
On/Off |
Current - Output (Max) |
20A |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Inverting |
Switch Type |
General Purpose |
Ratio - Input:Output |
1:1 |
Voltage - Load |
8V~18V |
Fault Protection |
Current Limiting (Adjustable), Open Load Detect, Over Temperature, UVLO |
Output Peak Current Limit-Nom |
20A |
Rds On (Typ) |
9m Ω |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SINK |
Length |
5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
TPS1HA08EQPWPRQ1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).There is a package for it in the 16-PowerTSSOP (0.173, 4.40mm Width) package.Mounting type Surface Mount is selected for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TA.The LED driver has a total of 1 outputs.In order to operate, it requires a voltage supply of Not Required.Voltage output is N-Channel volts at maximum.It has a total of Slew Rate Controlled features.It is a member of the TPS1HA08 family.As a result, there are 16 terminations.The LED driving board has a total of 1 functions.This lighting driver is capable of delivering a maximum output of 20A volts.As long as the supply voltage is 13.5V, high efficiency can be achieved.A component of this type is included in the Automotive, AEC-Q100 series.In order to operate normally, the supply voltage (Vsup) must be maintained above 8V.
TPS1HA08EQPWPRQ1 Features
Supplied from 13.5V
TPS1HA08EQPWPRQ1 Applications
There are a lot of Texas Instruments TPS1HA08EQPWPRQ1 Power Switches ICs applications.
- Smartphone and PDA
- Hard Disk Drives
- Handheld Devices
- Portable Devices
- USB Ports/Hubs
- Storage Drives
- PC Cards
- Notebook and Tablet Computers
- Wireless Headsets
- Hot Swap