banner_page

TPS1HB08FQPWPRQ1

N-Channel 0.65mm PMIC Automotive, AEC-Q100 Series TPS1HB08 6V 16-PowerTSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS1HB08FQPWPRQ1
  • Package: 16-PowerTSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 116
  • Description: N-Channel 0.65mm PMIC Automotive, AEC-Q100 Series TPS1HB08 6V 16-PowerTSSOP (0.173, 4.40mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 16-PowerTSSOP (0.173, 4.40mm Width)
Surface Mount YES
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series Automotive, AEC-Q100
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 6V
Terminal Pitch 0.65mm
Base Part Number TPS1HB08
Number of Outputs 1
Output Type N-Channel
Supply Voltage-Max (Vsup) 28V
Supply Voltage-Min (Vsup) 3V
Current - Output (Max) 70A
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) 3V~28V
Switch Type General Purpose
Output Polarity TRUE
Ratio - Input:Output 1:1
Input Characteristics STANDARD
Interface IC Type BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Driver Number of Bits 1
Fault Protection Current Limiting (Adjustable), Over Current, Over Temperature, Reverse Current, UVLO
Turn On Time 235 µs
Output Peak Current Limit-Nom 94A
Rds On (Typ) 8m Ω
Turn Off Time 235 µs
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SINK
Length 5mm
Width 4.4mm
RoHS Status ROHS3 Compliant

TPS1HB08FQPWPRQ1 Overview


The package is in the form of a Tape & Reel (TR).It is included in the package 16-PowerTSSOP (0.173, 4.40mm Width).A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C.In this LED driver, there are no outputs available.A supply voltage of 3V~28V is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It belongs to the TPS1HB08 family.It consists of 16 terminations in total.The LED driver has 1 functions.From the lighting driver, there is a maximum output of 70AV.Supply voltages of 6V allow for high efficiency.A component of this type is included in the Automotive, AEC-Q100 series.This LED driver is configured to have a maximum supply voltage of 28V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.There is a type BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface to the LED driving board.

TPS1HB08FQPWPRQ1 Features


Supplied from 6V

TPS1HB08FQPWPRQ1 Applications


There are a lot of Texas Instruments TPS1HB08FQPWPRQ1 Power Switches ICs applications.

  • USB Ports/Hubs
  • Wireless/Networking Cards
  • Storage Drives
  • Set-top-box
  • USB Power Distribution
  • Portable GPS
  • Gaming
  • PC Cards
  • Hot Swap
  • Wireless Headsets

Write a review

Note: HTML is not translated!
    Bad           Good