TPS2000CDGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Resistance | 72mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2000 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 2.9A |
| Current | 2A |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 69m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2000CDGN Overview
It is packaged in the form of a Tube.This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.The LED driver is mounted as Surface Mount.USB Switch is the switch type that it owns.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.It comes under the family of TPS2000.It has a total of 8 terminations.For operation, 8 pins are used.As far as functions are concerned, the lighting driver has 1.As long as the supply voltage is 5V, high efficiency can be achieved.The LED driver has a total of 8 pins.Currently, the LED driving board has a resistance of 72mOhm ohms.In this case, the output current is set to 2A.In this case, the analog IC in this gadget is ANALOG CIRCUIT.The total number of channels is 1.Voltage input is limited to 5.5V volts.A voltage of 4.5V volts is the minimum input voltage.
TPS2000CDGN Features
Supplied from 5V
Resistance of 72mOhm
1 channels
TPS2000CDGN Applications
There are a lot of Texas Instruments TPS2000CDGN Power Switches ICs applications.
- Portable GPS
- Wearable Devices
- Low Voltage I/O System Power
- Smart Phones, Feature Phones
- Set-Top Boxes
- Hot Swap
- USB3.1 Power Delivery
- Telecom and Network Systems
- HDD and SSD
- Portable Video Game Players
