TPS2001CDGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 19 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 72mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2001 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 2.9A |
| Current | 2A |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 72m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2001CDGN Overview
It is package in Tube case.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package includes it.The mounting type of the LED driver is Surface Mount.The switch type of this switch is USB Switch.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.In terms of features, the LED driving board has Status Flag.I believe it belongs to the TPS2001 family.In total, there are 8 terminations.The operation is carried out using the 8 pins.The LED driver has 1 functions.With a supply voltage of 5V, high efficiency is possible.This LED driver is equipped with a total of 8 pins.Lighting drivers with 72mOhm resistance are used.It is set to 2A in this case.There is an analog input IC in this gadget, which is ANALOG CIRCUIT.We offer 1 channels in total.There is a maximum input voltage of 5.5V volts.There is a minimum input voltage of 4.5V volts for this LED driver.
TPS2001CDGN Features
Supplied from 5V
Resistance of 72mOhm
1 channels
TPS2001CDGN Applications
There are a lot of Texas Instruments TPS2001CDGN Power Switches ICs applications.
- Portable GPS
- Hot Swap
- PDAs
- Low Voltage I/O System Power
- Hot-Swap Systems
- Hot Swaps
- Storage Drives
- Various applications equipped with buttons
- Solid-State Drives
- Portable Video Game Players
