TPS2002CDRCT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 84mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2002 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 75μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.4 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 3.25 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
TPS2002CDRCT Overview
It is package in Tape & Reel (TR) case.It's included in the 10-VFDFN Exposed Pad package.It has been mounted as Surface Mount on the LED driver.There is a switch type of General Purpose.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.There is a default setting of 2 for output.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts on this LED driver.It has a total of Status Flag features.As you can see, it comes from the TPS2002 family.In total, there are 10 terminations.It is necessary to use the 10 pins in order to operate the LED driver.Currently, the lighting driver has a total of 1 functions.As a result, the maximum output current is reduced to 2A in order to meet the operation requirements.The supply voltage can be 5V for high efficiency.It is positioned in the direction of Surface Mount.There is 84mOhm resistance on the LED driver.The maximum supply voltage is set to 5.5V.Normal operation requires Vsup above 4.5V.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, there are 2 channels available.
TPS2002CDRCT Features
Supplied from 5V
Resistance of 84mOhm
2 channels
TPS2002CDRCT Applications
There are a lot of Texas Instruments TPS2002CDRCT Power Switches ICs applications.
- Low Voltage I/O System Power
- Storage Drives
- USB3.1 Power Delivery
- Wearable Devices
- Portable GPS
- HDD and SSD
- Hot Swap
- Hot Swap
- Notebook and Tablet Computers
- Mobile Communication Devices
