TPS2003CDRCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 84mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2003 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 75μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 3.25 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2003CDRCT Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the 10-VFDFN Exposed Pad package.The lighting driver has the mounting type Surface Mount.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver is equipped with 2 outputs.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.As far as features are concerned, the LED driving board has Status Flag.The TPS2003 family consists of this type.As a result, there are 10 terminations.10 pins are used for operation.It has 1 functions.In this case, the LED driving board can produce only 2AV as its maximum output.With a supply voltage of 5V, high efficiency is possible.In total, it has 10 pins.84mOhm resistance is present in the lighting driver.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 2 channels available.Voltage input is limited to 5.5V volts.There is a minimum input voltage of 4.5V volts for this LED driver.
TPS2003CDRCT Features
Supplied from 5V
Resistance of 84mOhm
2 channels
TPS2003CDRCT Applications
There are a lot of Texas Instruments TPS2003CDRCT Power Switches ICs applications.
- HDD, SSD
- PC Cards
- Portable Devices
- Low Voltage I/O System Power
- Mobile Communication Devices
- Hard Disk Drives
- USB3.1 Power Delivery
- Storage Drives
- USB Power Distribution
- Wireless/Networking Cards
