Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
50mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Power Dissipation |
725mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2010 |
Pin Count |
8 |
Output Type |
N-Channel |
Max Output Current |
200mA |
Operating Supply Voltage |
5.5V |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Nominal Supply Current |
73μA |
Output Configuration |
High Side |
Output Current |
200mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
500nA |
Adjustable Threshold |
NO |
Quiescent Current |
73μA |
Input Type |
Non-Inverting |
Turn On Delay Time |
20 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Number of Inputs |
1 |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
40 ms |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Min Current Limit |
220mA |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) |
30m Ω |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2010AD Overview
As you can see, it's packaged in the way of a Tube.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.Surface Mount is the mounting type of the LED driver.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.It uses a supply voltage of Not Required to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.It belongs to the TPS2010 family.It consists of 8 terminations in total.The 8 pins are used for the operation of the system.It is important to note that the LED driving board has 1 functions.To meet the operation criteria, the maximum output current drops to 200mA.As long as the supply voltage is 3.3V, high efficiency can be achieved.8 pins are equipped with it.There is 50mOhm resistance on the LED driver.In this case, the output current is set to 200mA.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.For maximum efficiency, the supply voltage should be set to 5.5V.Its maximum input voltage is 5.5V volts.There is a minimum input voltage of 2.7V volts.It requires 500nA current to operate.A total of 1 inputs are available.
TPS2010AD Features
Supplied from 3.3V
Resistance of 50mOhm
1 channels
TPS2010AD Applications
There are a lot of Texas Instruments TPS2010AD Power Switches ICs applications.
- Smart Phones, Feature Phones
- HDD, SSD
- Portable Devices
- PDAs
- Low Voltage I/O System Power
- Notebook and Tablet Computers
- PC Cards
- Storage (HDDs, SSDs)
- Various applications equipped with buttons
- Hot Swaps