banner_page

TPS2010ADR

N-Channel PMIC TPS2010 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2010ADR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 937
  • Description: N-Channel PMIC TPS2010 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 30mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number TPS2010
Pin Count 8
Output Type N-Channel
Max Output Current 200mA
Operating Supply Voltage 5.5V
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Nominal Supply Current 73μA
Output Configuration High Side
Output Current 200mA
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 73μA
Adjustable Threshold NO
Quiescent Current 73μA
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 2.7V
Number of Inputs 1
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Min Current Limit 220mA
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Rds On (Typ) 30m Ω
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2010ADR Overview


As a result, it is packaged in the form of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.The mounting type of the LED driver is Surface Mount.The switch type of this switch is General Purpose.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.A supply voltage of Not Required is required for it to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.It comes under the family of TPS2010.As a result, there are 8 terminations.For operation, 8 pins are used.Currently, the lighting driver has a total of 1 functions.The maximum output current drops to 200mA in order to meet the operation criteria.As long as the supply voltage is 3.3V, high efficiency can be achieved.The LED driving board is equipped with a total of 8 pins.The LED driver has 30mOhm resistance.When this case is used, the output current is set to 200mA.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.Input voltage is limited to 5.5V volts.Input voltage must be at least 2.7V volts.It requires 73μA current to operate.The lighting driver is equipped with 1 inputs.

TPS2010ADR Features


Supplied from 3.3V
Resistance of 30mOhm
1 channels

TPS2010ADR Applications


There are a lot of Texas Instruments TPS2010ADR Power Switches ICs applications.

  • Notebook and Tablet Computers
  • Storage Drives
  • Wireless/Networking Cards
  • Hot Swaps
  • Low Voltage I/O System Power
  • Smartphone and PDA
  • PDAs
  • Mobile Communication Devices
  • Portable GPS
  • Telecom and Network Systems

Write a review

Note: HTML is not translated!
    Bad           Good