TPS2010APWP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2010 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 200mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 30m Ω |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2010APWP Overview
The package is in the form of a Tube.The 14-PowerTSSOP (0.173, 4.40mm Width) package contains it.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.I believe it belongs to the TPS2010 family.A total of 14 terminations have been recorded.In order to operate, 14 pins are used.The LED driver has 1 functions.There is a maximum output of 200mAV from the LED driver.Supply voltages of 3.3V allow for high efficiency.This lighting driver is mounted in the way of Surface Mount.As a result, it has a total of 14 pins.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.It requires 2.7V volts as the minimum input voltage.
TPS2010APWP Features
Supplied from 3.3V
1 channels
TPS2010APWP Applications
There are a lot of Texas Instruments TPS2010APWP Power Switches ICs applications.
- PDAs
- Various applications equipped with buttons
- Hard Disk Drives
- Handheld Devices
- Telecom and Network Systems
- Portable GPS Device
- Portable/Handheld Devices
- Set-Top Boxes
- HDD and SSD
- Mobile Communication Devices
