TPS2010APWPG4
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2010 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 200mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 30m Ω |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
TPS2010APWPG4 Overview
It is packaged in the form of a Tube.The 14-PowerTSSOP (0.173, 4.40mm Width) package contains it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.In this LED driver, there are no outputs available.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.As you can see, it comes from the TPS2010 family.In total, there are 14 terminations.It is necessary to use the 14 pins in order to operate the LED driver.It contains 1 functions.In terms of output, the lighting driver can provide a maximum of 200mA V.Using a voltage of 3.3V allows for high efficiency.Surface Mount is mounted in the way of this lighting driver.In total, it has 14 pins.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 1 channels available.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.Voltage input is limited to 5.5V volts.As a minimum input voltage, it requires 2.7V volts.
TPS2010APWPG4 Features
Supplied from 3.3V
1 channels
TPS2010APWPG4 Applications
There are a lot of Texas Instruments TPS2010APWPG4 Power Switches ICs applications.
- Hot Swap
- Wireless Headsets
- PC Card Hot Swap
- Hard Disk Drives
- Portable Music Players
- Solid-State Drives
- Handheld Devices
- Notebook and Tablet Computers
- Portable GPS Device
- USB3.1 Power Delivery
