TPS2010D
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 95mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS2010 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Continuous Drain Current (ID) | 200mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 220mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Drain to Source Resistance | 95mOhm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2010D Overview
As a result, it is packaged in the form of a Tube.This file is included in package 8-SOIC (0.154, 3.90mm Width).The lighting driver has the mounting type Surface Mount.General Purpose is the switch type that it owns.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.As a default, the output is set to 1.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It belongs to the TPS2010 family.A total of 8 terminations have been found in it.The operation is performed through the 8 pins.As far as functions are concerned, the lighting driver has 1.In order to meet the operation criteria, the maximum output current drops to 200mA.High efficiency is possible at 3V supply voltage.The LED driving board is equipped with a total of 8 pins.It has a resistance of 95mOhm.In this case, the output current will be set to 200mA.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.For maximum efficiency, the supply voltage should be set to 5.5V.Input voltage is limited to 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.This system has a maximum current requirement of 73μA.
TPS2010D Features
Supplied from 3V
Resistance of 95mOhm
1 channels
TPS2010D Applications
There are a lot of Texas Instruments TPS2010D Power Switches ICs applications.
- Hot Swap
- Portable/Handheld Devices
- Portable Music Players
- USB Power Distribution
- PDAs
- Set-top-box
- Notebook PC
- Storage (HDDs, SSDs)
- Set-Top Boxes
- Wireless Modem Data Cards
