TPS2010DG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS2010 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 220mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2010DG4 Overview
The LED driver's packaged as a Tube.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.It is possible to use 1 outputs in the lighting driver.A voltage of Not Required is used to power it.Voltage output is N-Channel volts at maximum.There is a TPS2010 family of things that it belongs to.A total of 8 terminations can be found in it.For operation, we use the 8 pins.As far as functions are concerned, the lighting driver has 1.To meet the operation criteria, the maximum output current drops to 200mA.A supply voltage of 3V leads to high efficiency.A total of 8 pins are present on it.Lighting drivers with 75mOhm resistance are used.This results in a 200mA output current.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.Optimal efficiency requires a voltage of 5.5V.The maximum input voltage is 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.It requires 73μA current to operate.
TPS2010DG4 Features
Supplied from 3V
Resistance of 75mOhm
1 channels
TPS2010DG4 Applications
There are a lot of Texas Instruments TPS2010DG4 Power Switches ICs applications.
- Wireless Modem Data Cards
- Notebook and Tablet Computers
- Wireless Headsets
- Mobile Communication Devices
- PC Cards
- USB3.1 Power Delivery
- Hot Swap
- Hot Swaps
- Portable Video Game Players
- Portable GPS Device
