TPS2010PWR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2010 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 220mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2010PWR Overview
The LED driver's packaged as a Cut Tape (CT).The 14-TSSOP (0.173, 4.40mm Width) package includes it.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The LED driver has 1 outputs.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.I believe it belongs to the TPS2010 family.It contains 14 terminations.During operation, the 14 pins are used.Currently, there are 1 functions associated with the lighting driver.In order to meet the operation criteria, the maximum output current drops to 200mA.With a supply voltage of 3V, high efficiency is possible.14 pins are connected to it in total.Currently, the LED driving board has a resistance of 75mOhm ohms.When this is the case, the output current is set to 200mA.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.A total of 1 channels are available for you to choose from.In order to maximize efficiency, the supply voltage should be set to 5.5V.A maximum input voltage of 5.5V volts can be applied to it.It has a 2.7V volt minimum input voltage.For its operation, a current of 73μA is required.
TPS2010PWR Features
Supplied from 3V
Resistance of 75mOhm
1 channels
TPS2010PWR Applications
There are a lot of Texas Instruments TPS2010PWR Power Switches ICs applications.
- Gaming
- Notebook and Tablet Computers
- Hot Swap
- Smartphone and PDA
- PC Cards
- Handheld Devices
- PDAs
- HDD and SSD
- Low Voltage I/O System Power
- Solid-State Drives
