TPS2010PWRG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2010 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 220mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS2010PWRG4 Overview
Tape & Reel (TR) is the way it's packaged.This file is included in package 14-TSSOP (0.173, 4.40mm Width).It has been mounted as Surface Mount on the LED driver.The switch type is General Purpose.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.There is a default setting of 1 for output.A voltage of Not Required is used to power it.It produces a maximum output voltage of N-Channel volts at its maximum output.As you can see, it comes from the TPS2010 family.The termination count is 14.The operation is performed through the 14 pins.The LED driver has 1 functions.As a result, the maximum output current is reduced to 200mA in order to meet the operation requirements.High efficiency is possible at 3V supply voltage.A total of 14 pins are present on it.There is 75mOhm resistance on the LED driver.In this case, the output current is set to 200mA.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.The supply voltage should be set at 5.5V for best efficiency.A maximum input voltage of 5.5V volts can be applied to it.A minimum input voltage of 2.7V volts is required for this LED driver.There is a maximum current requirement of 73μA for its operation.
TPS2010PWRG4 Features
Supplied from 3V
Resistance of 75mOhm
1 channels
TPS2010PWRG4 Applications
There are a lot of Texas Instruments TPS2010PWRG4 Power Switches ICs applications.
- Portable/Handheld Devices
- Solid State Drivers
- Portable Devices
- Gaming
- Hot-Swap Systems
- Handheld Devices
- PDAs
- Set-Top Boxes
- Wireless Headsets
- Portable GPS
