TPS2011AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2011 |
| Pin Count | 8 |
| Output Type | N-Channel |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 660mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 33m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2011AD Overview
The LED driver's packaged as a Tube.It is included in the package 8-SOIC (0.154, 3.90mm Width).This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is N-Channel volts.It is a member of the TPS2011 family.It contains 8 terminations.In order to operate, 8 pins are used.It is important to note that the LED driving board has 1 functions.In order to meet the operation criteria, the maximum output current drops to 600mA.It is possible to obtain high efficiency with a supply voltage of 3.3V.There are 8 pins in total on this board.30mOhm is the resistance of the lighting driver.This case results in a 600mA output current.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.There is a maximum input voltage of 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.For its operation, a current of 73μA is required.It is equipped with 1 input.
TPS2011AD Features
Supplied from 3.3V
Resistance of 30mOhm
1 channels
TPS2011AD Applications
There are a lot of Texas Instruments TPS2011AD Power Switches ICs applications.
- USB Power Distribution
- Gaming
- PC Card Hot Swap
- Notebook and Tablet Computers
- Mobile Communication Devices
- Portable Music Players
- Set-top-box
- Hard Disk Drives
- Set-Top Boxes
- Portable Video Game Players
