Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
30mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2011 |
Pin Count |
8 |
Output Type |
N-Channel |
Max Output Current |
600mA |
Operating Supply Voltage |
5.5V |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Nominal Supply Current |
73μA |
Output Configuration |
High Side |
Output Current |
600mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
73μA |
Adjustable Threshold |
NO |
Quiescent Current |
73μA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Number of Inputs |
1 |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Min Current Limit |
660mA |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) |
33m Ω |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2011ADRG4 Overview
The package is in the form of a Tape & Reel (TR).Package 8-SOIC (0.154, 3.90mm Width) contains it.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It belongs to the TPS2011 family.In total, there are 8 terminations.In order to operate, 8 pins are used.The LED driving board has a total of 1 functions.As a result, the maximum output current is reduced to 600mA in order to meet the operation requirements.As long as the supply voltage is 3.3V, high efficiency can be achieved.The LED driving board is equipped with a total of 8 pins.In this LED driving board, there is 30mOhm resistance.When this case is used, the output current is set to 600mA.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.In total, there are 1 channels available.It is recommended to set the supply voltage to 5.5V for optimum efficiency.Its maximum input voltage is 5.5V volts.Input voltage must be at least 2.7V volts.There is a maximum current requirement of 73μA for its operation.1 inputs are available.
TPS2011ADRG4 Features
Supplied from 3.3V
Resistance of 30mOhm
1 channels
TPS2011ADRG4 Applications
There are a lot of Texas Instruments TPS2011ADRG4 Power Switches ICs applications.
- Hot Swaps
- Wireless Modem Data Cards
- Storage Drives
- Handheld Devices
- Gaming
- Low Voltage I/O System Power
- Solid-State Drives
- Notebook PC
- Wireless Headsets
- Set-Top Boxes