TPS2011APWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 33mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 900mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2011 |
| Pin Count | 14 |
| Output Type | N-Channel |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 33m Ω |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2011APWP Overview
A Tube is used to package it.In the 14-PowerTSSOP (0.173, 4.40mm Width) package, it is included.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.Operation is based on a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It is a member of the TPS2011 family.It contains 14 terminations.For operation, 14 pins are used.There are 1 functions of the LED driver.In order to meet the operation criteria, the maximum output current drops to 600mA.A supply voltage of 3.3V leads to high efficiency.Surface Mount is mounted in the way of this LED driving board.As a result, it has a total of 14 pins.Currently, the LED driving board has 33mOhm resistance.When this is the case, the output current is set to 600mA.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.You can select from 1 channels.The supply voltage should be set at 5.5V for best efficiency.Input voltage is limited to 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.This system has a maximum current requirement of 75μA.It has 1 inputs.
TPS2011APWP Features
Supplied from 3.3V
Resistance of 33mOhm
1 channels
TPS2011APWP Applications
There are a lot of Texas Instruments TPS2011APWP Power Switches ICs applications.
- Portable Devices
- Portable/Handheld Devices
- Solid State Drivers
- Various applications equipped with buttons
- Hot Swap
- Portable Music Players
- Set-top-box
- Wireless/Networking Cards
- Telecom and Network Systems
- Portable GPS Device
