TPS2011D
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 140mOhm |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS2011 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 500nA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 660mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2011D Overview
The package is in the form of a Tube.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is a member of the TPS2011 family.As a result, there are 8 terminations.In order to operate, the 8 pins are used.It contains 1 functions.The maximum output current is reduced to 600mA to meet the operation criteria.Using a voltage of 3V allows for high efficiency.In total, it has 8 pins.It has 140mOhm resistance.It is set to 600mA in this case.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.There are a total of 1 channels available.Optimal efficiency requires a voltage of 5.5V.Its maximum input voltage is 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.This system has a maximum current requirement of 500nA.
TPS2011D Features
Supplied from 3V
Resistance of 140mOhm
1 channels
TPS2011D Applications
There are a lot of Texas Instruments TPS2011D Power Switches ICs applications.
- USB Protection
- Portable GPS Device
- USB Power Distribution
- HDD and SSD
- Hot Swap
- Set-top-box
- Notebook and Tablet Computers
- PC Card Hot Swap
- Gaming
- Set-Top Boxes
