TPS2011DG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS2011 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 660mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2011DG4 Overview
Tube is how it's packaged.The 8-SOIC (0.154, 3.90mm Width) package includes it.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.The LED driver has 1 outputs.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.I believe it belongs to the TPS2011 family.It contains 8 terminations.During operation, the 8 pins are used.It consists of 1 functions.The maximum output current is reduced to 600mA to meet the operation criteria.Supply voltages of 3V allow for high efficiency.A total of 8 pins are included in this LED driver.75mOhm is the resistance of the lighting driver.The output current is set to 600mA in this case.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.To choose from, there are 1 channels.In order to maximize efficiency, the supply voltage should be set at 5.5V.Its maximum input voltage is 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.It requires 73μA current to operate.
TPS2011DG4 Features
Supplied from 3V
Resistance of 75mOhm
1 channels
TPS2011DG4 Applications
There are a lot of Texas Instruments TPS2011DG4 Power Switches ICs applications.
- PC Cards
- USB Power Distribution
- Notebook and Tablet Computers
- Telecom and Network Systems
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- Smart Phones, Feature Phones
- Wireless/Networking Cards
- Hard Disk Drives
- Hot Swaps
