TPS2011DR
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS2011 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 660mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2011DR Overview
Tape & Reel (TR) is the way it's packaged.This package is included in 8-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~125°C TJ.There are 1 outputs available on this lighting driver.A voltage of Not Required is used to power it.Voltage output is N-Channel volts at maximum.It is a member of the TPS2011 family.It consists of 8 terminations in total.For operation, we use the 8 pins.The LED driving board has a total of 1 functions.As a result, the maximum output current is reduced to 600mA in order to meet the operation requirements.It is possible to achieve a high level of efficiency with a supply voltage of 3V.A total of 8 pins are included in this LED driver.In this case, there is 75mOhm resistance in the LED driving board.This results in a 600mA output current.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.There are a total of 1 channels to choose from.In order to maximize efficiency, the supply voltage should be set at 5.5V.Its maximum input voltage is 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.It operates at a maximum current of 73μA.
TPS2011DR Features
Supplied from 3V
Resistance of 75mOhm
1 channels
TPS2011DR Applications
There are a lot of Texas Instruments TPS2011DR Power Switches ICs applications.
- USB Protection
- USB3.1 Power Delivery
- USB Ports/Hubs
- Portable Video Game Players
- Set-top-box
- PC Cards
- Mobile Communication Devices
- USB Power Distribution
- Notebook and Tablet Computers
- Telecom and Network Systems
