TPS2011DRG4
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS2011 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 660mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2011DRG4 Overview
The package is in the form of a Tape & Reel (TR).This package is included in 8-SOIC (0.154, 3.90mm Width).The lighting driver has the mounting type Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.The LED driver is equipped with 1 outputs.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts.It is part of the TPS2011 family of LED drivers.It has a total of 8 terminations.The 8 pins are used for the operation of the system.Currently, there are 1 functions associated with the lighting driver.The maximum output current drops to 600mA in order to meet the operation criteria.As long as the supply voltage is 3V, high efficiency can be achieved.The LED driving board is equipped with a total of 8 pins.The LED driver has 75mOhm resistance.When this is the case, the output current is set to 600mA.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.In total, there are 1 channels available.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.The maximum input voltage of the LED driver is 5.5V volts.The input voltage minimum is 2.7V volts.For its operation, a current of 73μA is required.
TPS2011DRG4 Features
Supplied from 3V
Resistance of 75mOhm
1 channels
TPS2011DRG4 Applications
There are a lot of Texas Instruments TPS2011DRG4 Power Switches ICs applications.
- Portable Music Players
- Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Portable Devices
- USB Protection
- HDD, SSD
- Hot-Swap Systems
- Portable Video Game Players
- Hot Swap
