TPS2012AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2012 |
| Pin Count | 8 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 1.1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 33m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2012AD Overview
It is packaged in the form of a Tube.The 8-SOIC (0.154, 3.90mm Width) package includes it.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It comes under the family of TPS2012.It contains 8 terminations.The operation is carried out using the 8 pins.It contains 1 functions.This results in the maximum output current dropping to 1A to meet the operation criteria.The supply voltage of 3.3V is conducive to high efficiency.It is equipped with a total of 8 pins.It has a resistance of 30mOhm.The output current is set to 1A in this case.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.It is recommended to set the supply voltage to 5.5V for optimum efficiency.Its maximum input voltage is 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.There is a maximum current requirement of 73μA for its operation.We have available 1 inputs.
TPS2012AD Features
Supplied from 3.3V
Resistance of 30mOhm
1 channels
TPS2012AD Applications
There are a lot of Texas Instruments TPS2012AD Power Switches ICs applications.
- Set-top-box
- Portable GPS Device
- Hot Swaps
- USB Protection
- USB Power Distribution
- Portable Video Game Players
- Telecom and Network Systems
- USB3.1 Power Delivery
- Wireless Headsets
- Handheld Devices
