TPS2012ADR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2012 |
| Pin Count | 8 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 1.1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 33m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2012ADR Overview
It is packaged in the form of a Tape & Reel (TR).There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It belongs to the TPS2012 family.It contains 8 terminations.For operation, we use the 8 pins.The LED driver has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1A.High efficiency is possible when the supply voltage is set to 3.3V.As a result, it has a total of 8 pins.Lighting drivers with 30mOhm resistance are used.The output current is set to 1A in this case.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.For maximum efficiency, the supply voltage should be set to 5.5V.Its maximum input voltage is 5.5V volts.Input voltage must be at least 2.7V volts.It requires a maximum current requirement of 73μA.A total of 1 inputs are available.
TPS2012ADR Features
Supplied from 3.3V
Resistance of 30mOhm
1 channels
TPS2012ADR Applications
There are a lot of Texas Instruments TPS2012ADR Power Switches ICs applications.
- Hot Swaps
- Notebook and Tablet Computers
- USB Ports/Hubs
- Solid-State Drives
- Mobile Communication Devices
- Hot Swap
- USB3.1 Power Delivery
- Set-Top Boxes
- Portable GPS Device
- USB Power Distribution
