TPS2012D
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 95mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS2012 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 1.1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2012D Overview
It is packaged in the form of a Tube.The 8-SOIC (0.154, 3.90mm Width) package contains it.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.I believe it belongs to the TPS2012 family.It contains 8 terminations.8 pins are used for operation.It consists of 1 functions.To meet the operation criteria, the maximum output current drops to 1A.As long as the supply voltage is 3V, high efficiency can be achieved.As a result, it has a total of 8 pins.There is 95mOhm resistance on the LED driver.When this is the case, the output current is set to 1A.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.The maximum input voltage is 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.A maximum current requirement of 100μA is required for its operation.
TPS2012D Features
Supplied from 3V
Resistance of 95mOhm
1 channels
TPS2012D Applications
There are a lot of Texas Instruments TPS2012D Power Switches ICs applications.
- Hard Disk Drives
- Portable Music Players
- Wearable Devices
- PC Cards
- Portable Video Game Players
- HDD and SSD
- Mobile Communication Devices
- Storage (HDDs, SSDs)
- Set-Top Boxes
- USB Ports/Hubs
