TPS2012DG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS2012 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 1.1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2012DG4 Overview
Tube is the way it's packaged.The 8-SOIC (0.154, 3.90mm Width) package includes it.The lighting driver has the mounting type Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.The LED driver has a total of 1 outputs.It uses a supply voltage of Not Required to operate.Voltage output is N-Channel volts at maximum.It belongs to the family TPS2012.It contains 8 terminations.The 8 pins are used to operate the LED driver.It consists of 1 functions.This results in the maximum output current dropping to 1A to meet the operation criteria.Supply voltages of 3V allow for high efficiency.In total, it has 8 pins.It has 75mOhm resistance.This case has the output current set to 1A.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.Optimal efficiency requires a voltage of 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.Input voltage must be at least 2.7V volts.It requires 73μA current to operate.
TPS2012DG4 Features
Supplied from 3V
Resistance of 75mOhm
1 channels
TPS2012DG4 Applications
There are a lot of Texas Instruments TPS2012DG4 Power Switches ICs applications.
- Wireless/Networking Cards
- Hot Swap
- Portable GPS
- USB3.1 Power Delivery
- Mobile Communication Devices
- Hot-Swap Systems
- Portable/Handheld Devices
- PC Card Hot Swap
- Gaming
- Hot Swaps
